Rim type "Alpina" 2.1-10"

When you order it in "standard", it comes in Alumnium raw (not anodized). If you want it in a nice color, you choose "anodized" and state the color to us in the comment of the order.
We have the "standard" rim in stock and will imediately give it to the anodizing company when you buy it.

The weight of the rim is 1370g (3,02 lbs).
The width of the rim is 2.1", it suits all Piaggio Scootermatic forks till 2010 without beeing off center. You may also use the rim on Vespa PK and PX fors (requires usage of our adaptor wheel hub).
This rim comes in perfectly in combination with our competition brake "Zahnfee".

579,00 €

  • sofort versandbereit
  • 1 - 3 Tage Lieferzeit1

Rim front wheel ZIP/ET4 hub-> Vespa 2.1"

You ride a ZIP/ET4 fork in your Vespa scooter and want to combine the Vespa 2.1" rim with directional stability?
No problem with this component, which we developed together with PLC.
Install the ET4/ZIP fork, mount the rim and use a standard 2.1" rim from Piaggio or a tubeless rim from a retrofit company.
The component is delivered with threaded studs for the rim.

Assembly is for illustration only.

(KR0055)

(KR0056)

(KR0057)

274,99 €

  • 2 kg
  • sofort versandbereit
  • 1 - 3 Tage Lieferzeit1

Wheel hub suitable for PX/PK fork to adapt the rim front wheel PLC

Adapter to connect a PX/PK fork with our "Vespa 2.1" rim"?
The wheel hub replaces e.g. the PX/PK brake drum star and can be equipped with the original speedo drive.
The component is delivered with screws for the rim and spacers. With the spacer plate you can compensate up to 4mm track offset. If 4mm are underlaid, the wheel runs in the middle of the fork with a 2.1" rim.
Scope of delivery:

  • 1pc. hub.
  • 5pcs. M8x25
  • one pc. Spacer plate

Assembly is for illustrative purposes only.

(KR0052)

(KR0053)

(KR0054)

169,00 €

  • 2 kg
  • sofort versandbereit
  • 1 - 3 Tage Lieferzeit1

disc brake "Zahnfee" ZIP

Our interpretation of the perfect Vespa disc brake in "Clean Design".
Key features:

  •     200mm brake disc in 5,5mm material thickness
  •     fits Plug and Play on the PX Millenium Star
  •     Adapted brake pads from the motorbike range (pads available in many compounds We recommend MCB611SRQ)
  •     2x28 and 2x30mm brake pistons
  •     fits perfectly with 12-15mm brake pistons (depending on type)
  •     fits of course also with the PX wheel adapter KR52-54 for the top wheel adapter KR55-57 (see above)
  •     the "two finger stoppie" still at 150 km/h

The brake fits plug and play on any PX fork. On PK forks the usual damper offset plate, as on Grimeca brakes, is required.
The brake fits ONLY in combination with SIP tubeless rims, the new FA-Italia or SCK rims - The valve must be on the outside of the rim and must not go "through the rim" as with Pinasco or original Piaggio.
When used with original Piaggio / Grimeca brake pumps (12-12.7mm), extraordinary caution is advised. This is where the name "tooth fairy" comes from...
Grimeca NT stars may require material to be removed from the rear. This depends on the manufacturing tolerances of the wheelspiders. Shims are supplied for spacing the caliper mount. The brake caliper must be spaced so that the disc runs exactly in the centre.
The brake is intended for exhibition purposes only!
(KR0065) (KR0066) (KR0067) (KR0068)

690,00 €

  • 5,1 kg
  • sofort versandbereit
  • 1 - 3 Tage Lieferzeit1

Disc brake "Zahnfee" PX

Our interpretation of the perfect Vespa disc brake in "Clean Design".
Key features:

  •     200mm brake disc in 5,5mm material thickness
  •     fits Plug and Play on the PX Millenium Star
  •     Adapted brake pads from the motorbike range (pads available in many compounds We recommend MCB611SRQ)
  •     2x28 and 2x30mm brake pistons
  •     fits perfectly with 12-15mm brake pistons (depending on type)
  •     fits of course also with the PX wheel adapter KR52-54 for the top wheel adapter KR55-57 (see above)
  •     the "two finger stoppie" still at 150 km/h

The brake fits plug and play on any PX fork. On PK forks the usual damper offset plate, as on Grimeca brakes, is required.
The brake fits ONLY in combination with SIP tubeless rims, the new FA-Italia or SCK rims - The valve must be on the outside of the rim and must not go "through the rim" as with Pinasco or original Piaggio.
When used with original Piaggio / Grimeca brake pumps (12-12.7mm), extraordinary caution is advised. This is where the name "tooth fairy" comes from...
Grimeca NT stars may require material to be removed from the rear. This depends on the manufacturing tolerances of the wheelspiders. Shims are supplied for spacing the caliper mount. The brake caliper must be spaced so that the disc runs exactly in the centre.
The brake is intended for exhibition purposes only!
(KR0065) (KR0066) (KR0067) (KR0068)

 

690,00 €

  • 5,1 kg
  • sofort versandbereit
  • 1 - 3 Tage Lieferzeit1

Adapter plate shock absorber mounting top for disc brake Vespa PK

This component is used when a disc brake is mounted on a PK fork.
With this component the resulting offset and a lowering of 5mm is realized.

(KR0002)

34,50 €

  • 0,1 kg
  • sofort versandbereit
  • 1 - 3 Tage Lieferzeit1